China Helical Worm Gearbox with Hollow Output Shaft cycloidal gearbox

Product Description

Company  Profiles

     
-We are a leading gear motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
 

 

  • helical gear motor
  • helical bevel gear motor
  • parallel shaft helical gear motor
  • helical worm gear motor
  • hoist drive
  • heavy-duty helical gearbox
  • heavy-duty helical bevel gearbox
  • gear motor for car parking system
  • sprial bevel gearbox

Product Description
 

E series gear motor is combined with helical gear and worm gear. It is 90° for input and output shaft.

Mounting position: footed mounting, flange mounting and shaft mounting etc.

Technical data:

Output speed:0.12~397rpm

Rated output torque:10~4200N*m

Motor power: 0.12~22KW

Product Show

Product Specification

 

Product features
1. Economical operation, low noise and high permitted overhung loads.
2. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material  20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input /output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— ZheJiang or other brands requested
E —- series helical-worm gear motor
E-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37 20k6 80j6 80/120 0.12~1.5 6.72~160 105 8.4~397
E47 25k6 100j6 110/160 0.12~1.5 7.5~212 190 6.6~192
E57 30k6 112j6 130/200 0.18~3.0 7.5~212 340 6.5~194
E67 35k6 140j6 130/200 0.25~5.5 7.45~215 565 6~189
E77 45k6 180j6 180/250 0.37~7.5 7.9~257 1200 3.5~177
E87 60m6 225h6 250/350 0.55~15 8.52~277 2600 1.0~171
E97 70m6 280h6 350/450 1.5~22 8.26~282 4185 4.9~177
E- series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37D17 20k6 80j13 80/120 0.12 110~202 89 6.8~13
E47D17 25k6 100j13 110/160 0.12~0.18 180~438 255 3.2~7.4
E57D17 30k6 112j13 130/200 0.12~0.25 131~655 311 2.1~9.9
E67D37 35k6 140j13 130/200 0.12~0.37 246~1363 600 1.0~5.6
E77D37 45k6 180j13 180/250 0.12~1.1 219~3540 1230 0.39~6.4
E87D57 60m6 225h13 250/350 0.12~1.5 205~7643 2810 0.18~6.9
E97D57 70m6 280h13 350/450 0.12~3.0 179~11267 4420 0.12~7.7
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.

Package

Plastic bag + wooden carton

Certificate

FAQ

Q: Can you print other colors?
Yes. Customized color can be printed on the gear motor according to your requirements.
Q: Is that factory price?
Yes. We assure you all prices are based on factory.
Q:  What is the life span? what is the guarantee
The lifespan of gear motor can reach 5-20 years depending on different working conditions .The guarantee time is 1 year after delivery.
Q: What documents are available?
A full range documents including structural drawings, packing list, installation manual and relative certificates can be provided. Moreover, customs declaration is provided. We provide one-stop service for you. 
Q: Is it CZPT to customized?
yes, we could re-design and produce the gear motor as your requirements if the quantity is large.

US $500-1,500
/ Set
|
1 Set

(Min. Order)

###

Application: Motor, Machinery, Transmission Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

###

Customization:

###

Product features
1. Economical operation, low noise and high permitted overhung loads.
2. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material  20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input /output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— Taiwan or other brands requested
E —- series helical-worm gear motor
E-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37 20k6 80j6 80/120 0.12~1.5 6.72~160 105 8.4~397
E47 25k6 100j6 110/160 0.12~1.5 7.5~212 190 6.6~192
E57 30k6 112j6 130/200 0.18~3.0 7.5~212 340 6.5~194
E67 35k6 140j6 130/200 0.25~5.5 7.45~215 565 6~189
E77 45k6 180j6 180/250 0.37~7.5 7.9~257 1200 3.5~177
E87 60m6 225h6 250/350 0.55~15 8.52~277 2600 1.0~171
E97 70m6 280h6 350/450 1.5~22 8.26~282 4185 4.9~177
E- series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37D17 20k6 80j13 80/120 0.12 110~202 89 6.8~13
E47D17 25k6 100j13 110/160 0.12~0.18 180~438 255 3.2~7.4
E57D17 30k6 112j13 130/200 0.12~0.25 131~655 311 2.1~9.9
E67D37 35k6 140j13 130/200 0.12~0.37 246~1363 600 1.0~5.6
E77D37 45k6 180j13 180/250 0.12~1.1 219~3540 1230 0.39~6.4
E87D57 60m6 225h13 250/350 0.12~1.5 205~7643 2810 0.18~6.9
E97D57 70m6 280h13 350/450 0.12~3.0 179~11267 4420 0.12~7.7
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.
US $500-1,500
/ Set
|
1 Set

(Min. Order)

###

Application: Motor, Machinery, Transmission Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

###

Customization:

###

Product features
1. Economical operation, low noise and high permitted overhung loads.
2. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material  20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input /output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— Taiwan or other brands requested
E —- series helical-worm gear motor
E-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37 20k6 80j6 80/120 0.12~1.5 6.72~160 105 8.4~397
E47 25k6 100j6 110/160 0.12~1.5 7.5~212 190 6.6~192
E57 30k6 112j6 130/200 0.18~3.0 7.5~212 340 6.5~194
E67 35k6 140j6 130/200 0.25~5.5 7.45~215 565 6~189
E77 45k6 180j6 180/250 0.37~7.5 7.9~257 1200 3.5~177
E87 60m6 225h6 250/350 0.55~15 8.52~277 2600 1.0~171
E97 70m6 280h6 350/450 1.5~22 8.26~282 4185 4.9~177
E- series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37D17 20k6 80j13 80/120 0.12 110~202 89 6.8~13
E47D17 25k6 100j13 110/160 0.12~0.18 180~438 255 3.2~7.4
E57D17 30k6 112j13 130/200 0.12~0.25 131~655 311 2.1~9.9
E67D37 35k6 140j13 130/200 0.12~0.37 246~1363 600 1.0~5.6
E77D37 45k6 180j13 180/250 0.12~1.1 219~3540 1230 0.39~6.4
E87D57 60m6 225h13 250/350 0.12~1.5 205~7643 2810 0.18~6.9
E97D57 70m6 280h13 350/450 0.12~3.0 179~11267 4420 0.12~7.7
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Helical Worm Gearbox with Hollow Output Shaft     cycloidal gearbox	China Helical Worm Gearbox with Hollow Output Shaft     cycloidal gearbox
editor by czh 2022-11-24