Solution Description
TaiBang Motor Sector Team Co., Ltd.
The main products is induction motor, reversible motor, DC brush gear motor, DC brushless equipment motor, CH/CV large equipment motors, Planetary gear motor ,Worm equipment motor etc, which used broadly in a variety of fields of production pipelining, transportation, foodstuff, medicine, printing, material, packing, office, equipment, amusement and so on, and is the preferred and matched product for automatic equipment.
Taibang planetary gear motor is substantial energy effectiveness,lower sounds,prolonged support life,which is commonly utilized in a variety of sector.
Design Instruction
GE | 090 | 571 | P2 |
Reducer Collection Code | External Diameter | Reduction Ratio | Reducer Backlash |
GB:High Precision Square Flange Output
GBR:High Precision Proper Angle Square Flange Output GE:High Precision Spherical Flange Output GER:Higher Precision Right Spherical Flange Output |
050:ø50mm 070:ø70mm 090:ø90mm one hundred twenty:ø120mm 155:ø155mm 205:ø205mm 235:ø235mm 042:42x42mm 060:60x60mm 090:90x90mm one hundred fifteen:115x115mm 142:142x142mm one hundred eighty:180x180mm 220:220x220mm |
571 implies 1:10 | P0:Large Precision Backlash
P1:Precision Backlash P2:Regular Backlash |
Principal Technical Functionality
Merchandise | Number of stage | Reduction Ratio | GB042 | GB060 | GB060A | GB090 | GB090A | GB115 | GB142 | GB180 | GB220 |
Rotary Inertia | 1 | three | .03 | .16 | .sixty one | 3.25 | 9.21 | 28.98 | 69.61 | ||
four | .03 | .14 | .forty eight | two.74 | seven.fifty four | 23.67 | fifty four.37 | ||||
five | .03 | .thirteen | .47 | two.seventy one | seven.forty two | 23.29 | 53.27 | ||||
six | .03 | .13 | .45 | 2.sixty five | 7.25 | 22.75 | 51.72 | ||||
seven | .03 | .13 | .forty five | 2.62 | 7.fourteen | 22.48 | fifty.ninety seven | ||||
8 | .03 | .thirteen | .forty four | two.fifty eight | 7.07 | 22.fifty nine | fifty.eighty four | ||||
nine | .03 | .13 | .forty four | 2.57 | 7.04 | 22.53 | 50.sixty three | ||||
ten | .03 | .13 | .44 | 2.57 | 7.03 | 22.51 | 50.fifty six | ||||
2 | fifteen | .03 | .03 | .thirteen | .13 | .forty seven | .forty seven | two.71 | seven.forty two | 23.29 | |
20 | .03 | .03 | .13 | .thirteen | .47 | .forty seven | 2.seventy one | 7.42 | 23.29 | ||
25 | .03 | .03 | .13 | .thirteen | .47 | .forty seven | 2.seventy one | seven.42 | 23.29 | ||
thirty | .03 | .03 | .13 | .thirteen | .forty seven | .47 | 2.71 | seven.42 | 23.29 | ||
35 | .03 | .03 | .13 | .13 | .forty seven | .47 | 2.seventy one | seven.42 | 23.29 | ||
40 | .03 | .03 | .13 | .thirteen | .forty seven | .forty seven | two.seventy one | 7.42 | 23.29 | ||
45 | .03 | .03 | .13 | .13 | .forty seven | .forty seven | two.seventy one | 7.42 | 23.29 | ||
50 | .03 | .03 | .thirteen | .13 | .forty four | .44 | two.fifty seven | 7.03 | 22.51 | ||
60 | .03 | .03 | .13 | .thirteen | .44 | .44 | 2.57 | 7.03 | 22.fifty one | ||
70 | .03 | .03 | .thirteen | .thirteen | .forty four | .44 | 2.fifty seven | 7.03 | 22.fifty one | ||
80 | .03 | .03 | .13 | .thirteen | .forty four | .44 | two.57 | seven.03 | 22.51 | ||
ninety | .03 | .03 | .thirteen | .thirteen | .forty four | .44 | 2.fifty seven | seven.03 | 22.fifty one | ||
one hundred | .03 | .03 | .13 | .thirteen | .forty four | .forty four | two.fifty seven | 7.03 | 22.51 |
Item | Amount of phase | GB042 | GB060 | GB060A | GB90 | GB090A | GB115 | GB142 | GB180 | GB220 | |
Backlash(arcmin) | High Precision P0 | one | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | |||
2 | ≤3 | ≤3 | ≤3 | ≤3 | |||||||
Precision P1 | 1 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | |
2 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
Standard P2 | one | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | |
two | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
Torsional Rigidity(N.M/arcmin) | one | three | 7 | 7 | 14 | 14 | twenty five | 50 | 145 | 225 | |
two | 3 | seven | 7 | 14 | fourteen | twenty five | 50 | one hundred forty five | 225 | ||
Noise(dB) | 1,2 | ≤56 | ≤58 | ≤58 | ≤60 | ≤60 | ≤63 | ≤65 | ≤67 | ≤70 | |
Rated enter pace(rpm) | 1,2 | 5000 | 5000 | 5000 | 4000 | 4000 | 4000 | 3000 | 3000 | 2000 | |
Max enter speed(rpm) | one,two | ten thousand | 10000 | 10000 | 8000 | 8000 | 8000 | 6000 | 6000 | 4000 |
Noise examination common:Distance 1m,no load.Measured with an input speed 3000rpm
There are several kinds of gears, and the most typical classification approach is by equipment shaft. Generally, there are three varieties of the parallel axis, cross-axis, and staggered axis. 1) Parallel shaft gears: like spur gears, helical gears, inside gears, racks, and helical racks, and many others. 2) Cross shaft gears: straight bevel gears, spiral bevel gears, zero-diploma bevel gears, and so on. 3) Staggered shaft gears: There are staggered shaft helical gears, worm gears, hypoid gears, and many others.
Racks are used to transform rotary motion into linear motion. The spur tooth of the rack reduce into a single confront of the square or circular rod segment and operate with the pinion, which is a modest cylindrical equipment that meshes with the rack. Generally, racks and pinions are collectively referred to as “rack and pinion”.